Wendt -ZIEH-FIX® Elektro - Pick III battery operated electric Pick Gun uses the percussion principle. The necessary vibration frequency and strength of the pick is delivered by an eccentric.The Electro-Pick III is solely intended for the manipulative operation of lock cylinders. For this the Electro-Pick III is used in intervals, which means here: repeated consecutive switching on and off. The switching on and off period should be between 0.5 sec and 3.0 sec. The Electro Pick should not be in continuous operation by pressing down or locking the on-off switch. A continuous operation like this does not increase the success of manipulation (opening). Instead the continuous operation would increase the deterioration of the bearing, eccentric and the used picks.Note: The Electro-Pick III can only be used for manipulation of lock cylinder with single or double row pin. The pins need to be attached at the top or bottom in a vertical lock tube (alternatively left and right in a horizontal lock tube). A manipulation of a lock cylinder with more than two rows of pins with an Electro-pick is only possible to a limit extent. A manipulation of lock cylinder with pins (dimple or track systems) which are attached axial to the key way is only possible to a limit extent. The success rate of the manipulation in the above mentioned cases is usually so small that it cannot be mentioned.
• Developed by A.Wendt GmbH• For high requirements• Manufactured with the highest precision• Easy handlingBeside the Electro Pick the set also contains:
2 pcs. Pick “Novum”: Straight Blade, .020" / 0.5 mm 1 pc. Tension Tool, 5 1/4" / 13.35 cm 1 pc. Tension Tool, 2 1/4" / 5.7 cm 1 pc. Tension Tool, 3/4" / 1.9 cm 1 pc. Tension Tool, 11/2" / 3.8 cm